Why select Yokota pulse tools for better productivity?

Why select Yokota pulse tools for better productivity

Yokota Pulse is a type of tool which is famous globally in terms of speed and accuracy. And these amazing modifications are done by the YOKOTA i.e. pulse tool. YOKOTA has also an impact tool but there are some limitations in that tool that are slightly noisy and give some vibration while operating. So, to overcome this YOKOTA has developed a kind of tool i.e. Pulse tool, which is very less noisy and less vibration also gives the best result in accuracy and speed. There are many types of pulse tools. We choose one of them according to our use and less requirement of that feature. If I talk about the pulse tool there is also categorized into two mechanism. I.e. shutoff pulse tool and Non-shutoff pulse tool.


yokota pulse unitThe main features of this pulse tool having an oil pulse unit that is used to generate the required torque and there are no metal to metal contact (i.e. Impact Mechanism) it provides a softer, high controlled pulse with very much low vibration and noise than an impact wrench. This applies torque in smooth increment rather than in continuous blow. The Free speeds of 4,000 to 8,000 RPM are typical. Depending on the joint condition, whether it is soft or hard, so for hard joint, 10 to 15 pulses is usually enough to tighten an application.


yokota motor rotationThis type of wrenches having a twin blade impulse mechanism for sealing oil which provides a better repeatability. The mechanism is meant in order that the liner, rotated by the air motor gives an equal torque on both blades and instant rotation torque on the most shaft (see figure below). Depending on model and setting, the impulse wrenches give 10 - 40 impulses per sec. The power is transmitted by pressure and thus the impulse wrenches have a really low noise and vibration level.

Yokota Non-shutoff pulse tool: -

Yokota YLA seriesYLa Series: - The main advantages of this tool for better productivity is


The high motor efficiency gives extremely accurate and fast results. 

The maintenance cost is very lower.

This tool is very ergonomics: ergo touch / Ergo grip / Ergo trigger.

This tool is having a low environmental impact: reduction of CO2 emission / Low noise / low vibration.

Oil-free: can be used with non-lubricated air.

Range- 9 – 160nm and speed- 4000 to 7000rpm



yokota

Microntech is channel partner for YOKOTA in India, having local sales and service support all over India. Microntech has a team of experts that can help you understand the torque process. It is a premier assembly solution provider in India with global experience. To know more about assembly solutions provided by Microntech please visit our website www.microntechgroup.com or you can contact your nearest Microntech branch to schedule a demo or a visit for any issues you are facing on your assembly line.



Location: India

Comments

Post a Comment

Popular posts from this blog

How Pokayoke is ensured in Yokota System wrench

Image
How Pokayoke is ensured in Yokota System wrench YOKOTA System Wrench is a tightening tool made in Japan and very popular in terms of high tightening speed and high accuracy. It works by air pressure, this force is what causes the system to work; in other words, it is the power that drives the machine. Air pressure is provided by an air compressor. This machine has a gas-powered pump mechanism that continually forces air into a steel container tank until the air becomes pressurized. By using this pressurized air tool works. YOKOTA impulse wrenches are widely used for tightening jobs in the assembly industry, where accu rate torque tolerances are necessary. Impulse tools are light, powerful, small and very importantly, have no kick-back. Evaluation of tightening processes in car assembly shows that tightening joints uses 10% of the total assembly time. Working with faster tools, therefore, can speed up assembly lines substantially. YOKOTA System Wrench is built-in having an erro...
Read more

Snug Torque - Yokota - Microntech Engineers

Image
SNUG TORQUE - Yokota  In today’s blog topic the discussion will be about the snug point when the bolt is tightened and its significance in bolt tightening. Bolting joints are one of the most commonly used methods to join various parts together in  construction  and machines. They consist of bolts that hold and join other parts and are secured with the interlinking of the threads of bolt and nut.             There are two main types of bolted joint designs like in the tension joint, the joint should be designed such that the clamp load is never overcome by the external tension  forces  acting to separate the joint. If the external forces override the clamp load then the clamped joint will separate, allowing the free movement of the part which is not a part of bolting a joint. There are various torque control methods for tightening the bolts each method uses a different technique and...
Read more

How to check if your pulse tool needs servicing

Image
How to check if your pulse tool needs servicing YOKOTA impulse wrenches are widely used for tightening jobs in the assembly industry, where accurate torque tolerances are necessary. Impulse tools are light, powerful, small and very importantly, have no kick-back. Evaluation of tightening processes in car assembly shows that tightening joints uses 10% of the total assembly time. Working with faster tools, therefore, can speed up assembly lines substantially. The pulse unit of the tool is used to generate the torque or power on the tool such that toque can achieve to a certain range of the tool. Due to this pulse unit, vibration becomes very minimal and the operator can use the tool by holding through a single hand at a certain torque limit.    Impulse wrenches have a twin blade impulse mechanism for sealing oil which gives high repeatability. The mechanism is designed so that the liner, rotated by the air motor gives an equal torque on both blades and instant...
Read more